Everad TAC 2056 A + 2013 B : finally the real versatile single side glue for foam bonding you have been waiting for so long!
-October 2023- To bond foam in the manufacture of mattresses, seats and other foam assemblies, manufacturers use double side bonding glues. For single side gluing, these same glues are sometimes used but the performance is much lower than the performance of a double side glue. Everad has developed Everad® TAC 2056 A + 2013 B, THE […]
Find out more
Everad®TAC 5119.1 HS : the cost saver for your productivity!
-June 2023- At Interzum 2023, Everad presented its new glue that allows a revolutinary advance in the manufacture of mattresses with a roller gluer. To increase productivity and allow the immediate packing of mattresses (especially bed in box), mattress manufacturers have changed their process for 10 years by integrating infrared ovens. But the energy crisis […]
Find out more
How to reduce energy consumption with Everad adhesives?
-February 2023- Energy prices continue to rise at an alarming rate and interest in the environmental responsibility of manufacturers has never been higher. At the end of the day, there are huge greenhouse gas emissions, a consequent energy dependence which affects the profitability of companies. Energy consumption represents 10 to 60% of the production cost […]
Find out more
Everad® HAP 3508: The hotmelt adhesive for difficult applications!
-November 2022- With the new Everad HAP 3508 hotmelt adhesive, Everad has succeeded in combining requirements that were previously difficult to reconcile for demanding applications. This glue notably combines a long open time and a bonding capacity on difficult foams (viscoelastic, latex, M1, etc.). Everad® HAP 3508 will bring you the following additional (among others) benefits […]
Find out more
Everad® TAC 5016.0 : Versatile Waterbased contact adhesive for foam bonding roll process
-August 2022- The application of adhesive using rollers enables high productivity while flat gluing foam. When combined with Everad® TAC 5016.0, the method will lead to productivity improvements, better process control and lower costs. Everad® TAC 5016.0 has been developed specifically for application using rollers. It has been formulated for high stability, high initial tack and great ease of […]
Find out more
Everad® presents Everad® Green TAC 3010 Prime : the waterbased single side chlorine free contact adhesive you have been waiting!
-April 2021- We introduced our solvent-free solutions to the market back in the 20th century. A large number of customers worldwide use these products and appreciate their performance and differential benefits. For several years, we have been asked to continue our research to develop adhesives which do not use polychloroprene as a chemical base: CR-free. […]
Find out more
How do you create a bond that can withstand very high temperatures? Everad® ADS 7000 glues make it possible!
Everyone remembers the striking images of the incident at Notre Dame Cathedral in Paris on 15-16 April 2019. In the wake of such a significant event, many people have asked themselves the following question: How do you create a bond that can withstand very high temperatures? Everad® ADS 7000 series adhesives are the answer to […]
Find out more
Everad® presents Everad® Green TAC 3007 High Tech: the new chlorine free high tech generation!
-Feb. 2021- For the past two years, the foam bonding market has been marked by difficulties in the supply of certain raw materials, mainly polychloroprene for the manufacture of water-based contact adhesives. We have been aware of the occurrence of such phenomena for many years, and as we are always at the cutting edge of […]
Find out more
Everad HCE 9118 : the high performance hotmelt adhesive for gluing pocket springs
-October 2020- Thanks to its experience of more than 30 years in this technology, Everad is a recognized specialist for foam applications. We supply mattress manufacturers who use hotmelt technology with glues based on different polymers and for all types of bonding. One of those application is the bonding of pocket springs ; this is a […]
Find out more
Everad ® HAP 3497 Premium : The versatile PREMIUM hotmelt you have been waiting for so long!
-March 2020- Everad HAP 3497 PREMIUM With the new Everad HAP 3497 hotmelt adhesive, an ultimate step has been made in bringing together all the requests from mattress manufacturers. Indeed, this glue allows to combine all the qualities sought for quality bonding in mattresses. Everad® HAP 3497 will bring you the following additional (among others) […]
Find out more